The Era of the Slideout Room

Interesting RV Articles

RV Waste Systems

RV Chalet
RV Maintenance, Service, and Repair
A Safe LP System
AC Power Line Problems--A Mystifying Menace

A Clean Sweep for Your RV
Article and Photos by Gary Bunzer

Quite possibly, one of the most irritating aspects of owning and traveling in a recreation vehicle just might center on simply trying to keep the RV interior clean. One would think it wouldn't be that difficult given the relatively small confines of the typical RV. But just try a week or two at one of the country's beautiful coastline beaches with the kids or grand-kids. Sit and count how often they trek out to the sand, run back in for a cool drink and then scamper back out to the water's edge. And each time they take that journey, thousands of those tiny granules of sand become embedded into the plush carpeting or throw rug inside the RV. By the time you return home you'd swear they brought that uncanny sand sculpture of Uncle Jack back with them.

Or try a few muddy nights along side your favorite fishing hole. Or travel through the mid-west on a blustery and dusty fall day. You bet, the RV lifestyle is well worth it, but wouldn't it be more enjoyable without having to rent that carpet cleaning machine each time you return to your home base?

And what about traveling with Fido? Sure, he's a definitive member of the family and you wouldn't think of leaving him home, but how many times have you scooped handfuls of canine hair from the toe space under the kitchen cabinets? Be honest now. Makes you want to fret, huh?

Well, fret no longer. Thanks to the RV 2000 Maxum central vacuum system produced by HP Vacuflo. This powerful, yet compact cleaning system may be just the ticket to alleviate some of those interior cleaning woes we all encounter from time to time.

Marketed to RVers, this kit is easily installed by the average handyman and comes so well equipped you will enjoy the benefits of a clean RV for many years to come.

With simple instructions written on a single sheet of paper, this complete system can be installed in less than one hour as long as a 120-volt AC receptacle is already positioned nearby.

Automatically engaged by simply lifting the front gate of the inlet valve and inserting the hose assembly, this system comes with all the adapters, fittings and brackets needed to install the unit in virtually any recreation vehicle. It is safely installed under a dinette seat, inside a storage compartment, under the bed or in any convenient location with about 600 cubic inches of space.

Equipped with a 30-foot hose, this unit will satisfy even the longest of RVs when centrally located.

Though the inlet valve can be connected directly to the main assembly in many cases, other installations may mandate the inlet valve be remotely located and connected by use of the supplied Flex Kit. The inlet valve is then connected to the main assembly by threading the flex connecter hose counter-clockwise into the adapter fittings. The flex connector can be trimmed to the shortest length needed to reach the main canister assembly.

All the fittings simply piece together without the need for cement or special tools. The main canister assembly can be positioned horizontally or vertically depending on the best placement inside the RV. Adjustable mounting brackets make this task a snap.The only precaution necessary is to be sure the front panel is accessible after installation. The replaceable bag is positioned behind this front cover.

The unit is shipped with a 120-volt plug pre-wired into the assembly so electrifying the vacuum is accomplished by simply plugging the cord into a receptacle. Keep in mind, some installations may require a new receptacle to be wired into the existing 120-volt AC system. Have a qualified electrician install one if necessary.

The inlet valve switch is easily wired by inserting the provided and pre-stripped conductors into the back of the inlet valve. Push the wires in firmly to lock them, then tug on them to be sure they are correctly connected.

Carefully route the double conductor to the main canister assembly and connect them to the two exposed wires protruding from the side of the unit using the provided wire nuts. This is a low voltage circuit and polarity is not a factor. Just be sure the wire nuts are snug. It's always a good idea to wrap the wire nuts with electricians tape to be sure they will not vibrate loose while bouncing along the highway. It does happen! Be sure the conductor does not come into contact with any sharp corners when routing.

[ Home ] [ Ask the RV Doctor ] [ RV Doctor Column ] [ Memorandums ] [ Interesting Articles ]
[ Product Spotlight ] [RV Service Technician Training ] [ Seminars ] [ Links ] [ Gary's Bio ]

Send your questions and comments to: gbunzer@cox.net
Copyright^©2002 Bunzer Consulting
Website Design by Camping World, Inc.


Interesting RV Articles RV Waste Systems RV Chalet RV Maintenance, Service, and Repair A Safe LP System AC Power Line Problems--A Mystifying Menace A Clean Sweep for Your RV Article and Photos by Gary Bunzer Quite possibly, one of the most irritating aspects of owning and traveling in a recreation vehicle just might center on simply trying to keep the RV interior clean. One would think it wouldn't be that difficult given the relatively small confines of the typical RV. But just try a week or two at one of the country's beautiful coastline beaches with the kids or grand-kids. Sit and count how often they trek out to the sand, run back in for a cool drink and then scamper back out to the water's edge. And each time they take that journey, thousands of those tiny granules of sand become embedded into the plush carpeting or throw rug inside the RV. By the time you return home you'd swear they brought that uncanny sand sculpture of Uncle Jack back with them. Or try a few muddy nights along side your favorite fishing hole. Or travel through the mid-west on a blustery and dusty fall day. You bet, the RV lifestyle is well worth it, but wouldn't it be more enjoyable without having to rent that carpet cleaning machine each time you return to your home base? And what about traveling with Fido? Sure, he's a definitive member of the family and you wouldn't think of leaving him home, but how many times have you scooped handfuls of canine hair from the toe space under the kitchen cabinets? Be honest now. Makes you want to fret, huh? Well, fret no longer. Thanks to the RV 2000 Maxum central vacuum system produced by HP Vacuflo. This powerful, yet compact cleaning system may be just the ticket to alleviate some of those interior cleaning woes we all encounter from time to time. Marketed to RVers, this kit is easily installed by the average handyman and comes so well equipped you will enjoy the benefits of a clean RV for many years to come.

With simple instructions written on a single sheet of paper, this complete system can be installed in less than one hour as long as a 120-volt AC receptacle is already positioned nearby. Automatically engaged by simply lifting the front gate of the inlet valve and inserting the hose assembly, this system comes with all the adapters, fittings and brackets needed to install the unit in virtually any recreation vehicle. It is safely installed under a dinette seat, inside a storage compartment, under the bed or in any convenient location with about 600 cubic inches of space. Equipped with a 30-foot hose, this unit will satisfy even the longest of RVs when centrally located. Though the inlet valve can be connected directly to the main assembly in many cases, other installations may mandate the inlet valve be remotely located and connected by use of the supplied Flex Kit. The inlet valve is then connected to the main assembly by threading the flex connecter hose counter-clockwise into the adapter fittings. The flex connector can be trimmed to the shortest length needed to reach the main canister assembly. All the fittings simply piece together without the need for cement or special tools. The main canister assembly can be positioned horizontally or vertically depending on the best placement inside the RV. Adjustable mounting brackets make this task a snap.The only precaution necessary is to be sure the front panel is accessible after installation. The replaceable bag is positioned behind this front cover. The unit is shipped with a 120-volt plug pre-wired into the assembly so electrifying the vacuum is accomplished by simply plugging the cord into a receptacle. Keep in mind, some installations may require a new receptacle to be wired into the existing 120-volt AC system. Have a qualified electrician install one if necessary. The inlet valve switch is easily wired by inserting the provided and pre-stripped conductors into the back of the inlet valve. Push the wires in firmly to lock them, then tug on them to be sure they are correctly connected. Carefully route the double conductor to the main canister assembly and connect them to the two exposed wires protruding from the side of the unit using the provided wire nuts. This is a low voltage circuit and polarity is not a factor. Just be sure the wire nuts are snug. It's always a good idea to wrap the wire nuts with electricians tape to be sure they will not vibrate loose while bouncing along the highway. It does happen! Be sure the conductor does not come into contact with any sharp corners when routing.
[ Home ] [ Ask the RV Doctor ] [ RV Doctor Column ] [ Memorandums ] [ Interesting Articles ] [ Product Spotlight ] [RV Service Technician Training ] [ Seminars ] [ Links ] [ Gary's Bio ] Send your questions and comments to: gbunzer@cox.net Copyright^©2002 Bunzer Consulting Website Design by Camping World, Inc.